DPP-80 small automatic alu alu blister forming machine for sale
Introduction:
The blister forming machine has the advantages of extending the retention period, beautifying the product, and reducing packaging costs. Because this lister forming machine occupies a small area, low investment, multi-functional use, high efficiency, no pollution, and low noise, it is an ideal packaging equipment for purifying workshops and hospital reagent rooms.
Features of DPP-80 small automatic alu alu blister forming machine for sale:
1. Use domestic high-power transmission mechanism is adopted, and the main rotating shaft is driven by the chain, eliminating the errors and noise of other gear transmissions;
2. The appliance adopts an imported control system, which can be configured with missing material missing and missing device and missing particle detection and removal device according to customer requirements;
3. The whole blister sealing machine adopts segmented combination: PVC forming, feeding, heat sealing is one segment, and tropical aluminum cold forming, heat sealing, and punching are divided into one segment for split packaging;
4.Using photoelectric control system, PVC, PTP, rigid aluminum packaging automatic feeding, waste edge automatic punching device to ensure the long-distance multi-station synchronization stability;
5. Can be equipped with additional photoelectric detection and correction device, imported stepper motor traction, graphic and text printing and packaging to optimize the packaging grade;
6. This blister forming machine is suitable for: blister-sealed packaging of sugar-coated candy, gel pills, injections, special shapes, etc., as well as medical equipment, light food, and electronic components.
Various DPP-80 small automatic alu alu blister forming machine for sale:
Main Parameter of DPP-80 small automatic alu alu blister forming machine for sale:
| Punching frequency: 10-40 times/min, 2400plate/hour |
| Normal section: 57*80mm | Specification: 27*80mm one plate per time |
| Max forming area: 80*110*26mm | 60*100mm one plate per time |
| The feed stroke range: 20-70mm | |
| Yield rate: more than 99% | Motor power: 0.75kw |
| Forming heating power: 0.9kw | Low heating power: 0.9kw |
| Heat sealing power: 0.8kw | Gas mercury passenger volume: more than 0.3m3 |
| Cooling: circulating water or tap water | Weight: 450kg |
| Dimension: 1740*590*1190mm | |
| Packing material: Medicinal PVC 0.3*80MM Aluminum foil 0.023*80mm |
Detail Shows of DPP-80 small automatic alu alu blister forming machine for sale:
Real Photos of DPP-80 small automatic alu alu blister forming machine for sale:
Application of DPP-80 small automatic alu alu blister forming machine for sale:
Installation and precautions of DPP-80 small automatic alu alu blister forming machine for sale:
1. Check whether the ground level is balanced before installation.
2. The ground wire should be connected at the location specified on the grounding label.
3. Full-time personnel training operation and maintenance.
4. The machine should be kept clean and tidy.
5. All parts of the machine must be refueled before production (refer to the operating provisions)
6. When the machine leaves the factory, the gearbox strap lubricating oil must be refueled before production.
7. It is recommended to use oil-free air compressor for this machine.
8. The pressure of forming, heat sealing, indentation and other parts should not be too high, otherwise it will affect the service life. There should be a floating margin of about one millimeter for the forming and indentation of the pad.
Pharmacy Process of DPP-80 small automatic alu alu blister forming machine for sale:
